CD NON STRUCTURAL


Our Pine CC/DD Non-Structural grade plywood is manufactured from the finest pine plantations (renewable source) in Brazil, utilizing premium quality pine veneer in two specific grades “C” and “D”.

“C” grade veneer complies with the “C” grade veneer standard for Australia. (Sanded and filled) Non-permitted defects in “C” grade veneer:

Unfilled holes, splits and open face joints. Bark, gum and resin pockets. “D” grade veneer complies with the “D” grade veneer standard for Australia (unsanded and unfilled).
Sheet size: 2400 x 1200
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.
Thicknesses: 7mm (3 ply), 9mm(5 ply), 12mm(5 ply), 15mm(7 ply), 17mm(7 ply), 19mm(9 ply)

BRACING PLY


Bracing Ply is most commonly used in building and construction to 'brace' timber frames in order to supply extra strength and support. Bracing Ply is most commonly made from Hardwood, graded 'CC', and supplied as 4mm thick - although there are variations. It also comes in a variety of treatment options.

Tradeware stock Bracing Ply in the following sizes - either untreated, H2S or H2;

  • 2440 x 900
  • 2440 x 1200
  • 2745 x 900
  • 2745 x 1200
  • 3050 x 900
  • 3050 x 1200

TONGUE & GROOVE PLY FLOORING


Tongue & Groove Ply Flooring is most commonly used in building and construction as a substrate flooring - to be laid directly onto floor joists, with an alternative product such as timber or engineered floor boards, tiles, carpet etc., to be laid on top. It is both safe and reliable when used in commercial and industrial building, and is easily designed to resist the high loading criteria required by the building codes. Its resilience and strength have been utilised in storage decks, truck floors, and flooring in sporting compleses and agricultural buildings.

Plywood flooring systems are a cost effective alternative to suspended floors in such applications

Tongue & Groove Ply Flooring is an alternative to particle board flooring (commonly known as 'orangetongue')

Tradeware source T&G ply flooring in 15, 17 and 19mm thicknesses and in 2400 x 1200 or 2700 x 1200 sheet sizes. This product is available treated or untreated.

MARINE PLY


An Okoume throughout plywood panel with selected cores and in compliance with the English norm BS 1008-1:2003 Lloyd’s Register Type Approved, Marine ply is recommended for nautical construction and boat furnishings. It has a wonderful lightness and an excellent resistance to damp conditions (Class 3 gluing) which enables it to meet the specific demands of naval construction. It can also be used for interior furnishings thanks to its numerous possibilities of finish. It can be used in structure, for example the making of ship hulls, often with the use of fibre glass and epoxy resin.
Ply & Particle Board - image Marine-Joubert on https://tradewarebuildingsupplies.com
Sheet Size: 2500 x 1220
Glue Bond: Class 3 gluing
Thicknesses: 4mm, 6mm, 9mm, 12mm, 18mm, 25mm
Sheets/Pack: 4mm – 62, 6mm – 42, 9mm – 110, 12mm – 84, 18mm – 56, 25mm – 40

OKOUME OKOUPLEX


Okouplex with Class 3 exterior gluing – certified NF Extérieur CTBX is a benchmark product, Okoume throughout, used mainly in the building industry (flooring, walls, hidden supports for waterproof materials) and coach building. It is appreciated for its excellent cutting and machining qualities.
Ply & Particle Board - image Packshot-Okouplex-2014-Marquage-RVB-HD-e1424394160960 on https://tradewarebuildingsupplies.com
Sheet Size: 2500 x 1220
Glue Bond: Class 3 gluing
Thicknesses: 6mm, 9mm, 12mm, 15mm, 18mm
Sheets/Pack: 6mm – 84, 9mm – 110, 12mm – 84, 15mm – 67, 18mm – 5

FORM PLY


Form Ply is available in 2400 x 1200 or 1800 x 1200 usually at a thickness of 17mm - although there are some variations available. Form Ply is also available in different structural grades. We do not usually keep Form Ply in stock, but order it in as required. Lead time is normally only 1-2 days.

Formply, other-wise known as Hardface, is a plywood made with a bond glue, radiata core and hardwood veneer faces with a high density overlay (HDO) resin impregnated finish that is smooth, perfect for use in concrete formwork and can be used several times.

Applications:
Formwork in walls, floors, roofs, frames, bridges, dams, etc
Ply & Particle Board - image Formply2 on https://tradewarebuildingsupplies.com

PARTICLE BOARD FLOORING


Particleboard Flooring is a well-established and well performed product in the Australian home and building industry. This wide use and acceptance has led to an increasing number of enquiries from engineers, architects and designers about Particleboard Flooring for commercial and industrial applications.

Particleboard Flooring provides major cost savings through its economy and through lighter construction allowing reduced foundation cost. Installation times are reduced since dry trades only are involved. Particleboard floors are also more comfortable for people standing for long periods and offer better wearing characteristics than some other flooring materials for wheeled traffic (especially small wheels) because of the dense surface layer.
Ply & Particle Board - image particleboard-flooring on https://tradewarebuildingsupplies.com

LP OSB SMART PANEL 11.1 MM

EXTERIOR CLADDING

Ply & Particle Board - image osb-300x200 on https://tradewarebuildingsupplies.com

OSB HOME GUARD


Stronger and Cleaner – No added Urea Formaldehyde – Super Eο Greener: Totally renewable forests (No Knots).
  • Structural Panel with stud spaces at 610mm, MPG 10 timber size: 70 x 35, H2 & Anti-Fungus treated – SAVE ON TIMBER.
  • OSB already installed onto the frame – OSB is installed onto your frames by your approved Frame & Truss plant – SAVE ON LABOUR.
  • No bracing required – Home Guard provides all the strength required – approved to 3.0 Kn/sp.m as certified by UTS Access (University of Technology Sydney). Complies with Building Code of Australia – SAVE ON BRACING.
  • No tie down rods – OSB Home Guard provides all the strength, in a totally wrapped system – SAVE ON HARDWARE & LABOUR.
  • No lintels required less than 2000mm long – SAVE ON LINTELS & LABOUR.
  • Provides a smooth flat and extremely strong surface for the application of your favourite external cladding eg. Rockcote EPS systems or Smart Panel cladding – SAVE ON TIME.
  • Extremely price competitive, additional insulation properties, stronger building, faster assembly, quicker lock up time. – RECEIVE YOUR LOCK UP PAYMENT QUICKER.

LP OSB SMART PANEL 11.1 MM

EXTERIOR CLADDING


  • STRUCTURAL PANEL with Stud spaces at 610mm, MPG 10 timber size:  70 x 35,  Primed,H3 and Anti-Fungus treated  – SAVE ON COSTS.
  • Simple installation , similar to Plywood Cladding , cover area   2440 x 1220, Woodgrain appearance with grooves at 200 mm centres.
  • Pre-Primed and ready for painting, does not get the resin patches associated with plywood and Dark Colour paints.
  • NO BRACING REQUIRED   – Smart Panel  provides all the strength required  – approved to  0 kN/m2 as per certificates from UTS Access (University of Technology , SYDNEY)  complies with the Building Code of Australia  –  SAVE ON BRACING.
  • Extremely price competitive, additional insulation properties, stronger building, faster assembly, quicker lock up time. Receive your lock up payment quicker.
  • OSB strength is equal on the length and the width, the sheets can be applied to the frame in either direction,  that is vertical or horizontal. And if installed with the LP OSB Home Guard 9.5mm system the Smart Panel only requires  to be nailed at 300mm centres.
  • Suitable for many more structural applications

FILM FACE FORM PLY


Ply & Particle Board - image FP_face-300x148 on https://tradewarebuildingsupplies.com
Manufactured in Brazil with 100% Slash Pine from renewable pine plantations. This product is ideal for cement applications where a structural strength is not required, such as driveways, tilt slab and gutters. Paper overlay is a brown colour 120gsm.
Sheet size: 2400 x 1200
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil
Thickness: 12mm, 17mm, 18mm (7 ply – not including paper)

BENDI PLY


Manufactured in India from 100% Gurjan timber. Bendi plywood is designed to form in either long grain or cross grain direction. When placing orders it is necessary to nominate the direction of form required. Ideal for fabrication in commercial applications such as curved reception desks, kitchen benches and columns.

Sheet Size: 2440 x 1220 (long grain) and 1220 x 2440 (cross grain).
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil
Thickness: 6mm (5 ply) Sanded both sides and smooth for lamination.

Ply & Particle Board - image EcoFork-2 on https://tradewarebuildingsupplies.com