There are so many different sizes, styles and variations when it comes to Engineered Wood Products (EWP) that it's just not feasible to stock a comprehensive range. For this reason, we only keep a basic service range in stock at our yard.

We stock H3 Treated LVL at 6 metre lengths in a select range of sizes (150,200,240,300,360 x 45 & 63). It is not uncommon to find off-cuts or surplus order stock in our racks as well as our standard range.

We also stock a selection of 6 metre GL17S Merbau.

For most EWP however, it is usually a matter of ordering it from our suppliers.

We have fostered exceptional relationships with a number of suppliers, and can usually source the required products, and have them in our yard within 2-3 working days, and in many cases even quicker.

The following lists are products which we can quickly and easily source from our suppliers.

Most engineered timbers are available in 300mm increments in lengths up to 12m.

Please note: There may be minor differences in some sizes and dimensions depending on supplier.

E13 and E14 ('E' = Elasticity) sizes. Each of the following can be ordered in either Untreated, H2S, H2 or H3 treated

LGL or Edge Glued Laminate timber is a solid wood alternative to LVL. It has improved stability and nailing properties to LVL. It is treated to H3 as standard. Lengths up to 12 metres.

The 'C' in 17C stands for 'Camber'. These pre glue laminated pre-cambered beams that are designed to finish straight under a load. 17S are a similar beam but are ('S' - Straight) not pre-cambered. Each of the following can be ordered in either Untreated, H2 or H3 treated.

A stronger grade than the 17C. 18C is often made from hardwood. It is commonly used as a replacement for 17C and is suitable for lintels or roof beams.

Designed for high load and constructed from hardwood species, 21C are durable and termite resistant and are commonly used where aesthetic considerations are critical.

Specifically designed for use as joists, these engineered beams consist of two LVL flanges with a structural plywood web. It is a cost-effective, light and strong solution for floor joists. These beams come either H2S or H2 treated in the following sizes;

Web Stiffeners are used to add additional strength to I-Beams in areas where they are under greater load. They come either H2S or H2 treated in the following sizes;

Rimboard is used to enclose edges on areas using I-Beams. They come either H2S or H2 treated in the following sizes;

We stock H3 Treated LVL at 6 metre lengths in a select range of sizes (150,200,240,300,360 x 45 & 63). It is not uncommon to find off-cuts or surplus order stock in our racks as well as our standard range.

We also stock a selection of 6 metre GL17S Merbau.

For most EWP however, it is usually a matter of ordering it from our suppliers.

We have fostered exceptional relationships with a number of suppliers, and can usually source the required products, and have them in our yard within 2-3 working days, and in many cases even quicker.

The following lists are products which we can quickly and easily source from our suppliers.

Most engineered timbers are available in 300mm increments in lengths up to 12m.

Please note: There may be minor differences in some sizes and dimensions depending on supplier.

## LVL (Laminated Veneer Lumber)

E13 and E14 ('E' = Elasticity) sizes. Each of the following can be ordered in either Untreated, H2S, H2 or H3 treated

Hyspan + | 90 x 35 |

Hyspan + | 120 x 35 |

Hyspan | 130 x 35 |

Hyspan + | 140 x 35 |

Hyspan | 150 x 35 |

Hyspan | 170 x 35 |

Hyspan+ | 190 x 35 |

Hyspan | 200 x 35 |

Hyspan + | 240 x 35 |

Hyspan+ | 290 x 35 |

Hyspan | 300 x 35 |

Hyspan + | 90 x 45 |

Hyspan + | 120 x 45 |

Hyspan | 130 x 45 |

Hyspan + | 140 x 45 |

Hyspan | 150 x 45 |

Hyspan | 170 x 45 |

Hyspan + | 190 x 45 |

Hyspan | 200 x 45 |

Hyspan | 240 x 45 |

Hyspan + | 240 x 45 |

Hyspan + | 290 x 45 |

Hyspan | 300 x 45 |

Hyspan | 360 x 45 |

Hyspan | 400 x 45 |

Hyspan | 90 x 63 |

Hyspan | 130 x 63 |

Hyspan | 150 x 63 |

Hyspan | 170 x 63 |

Hyspan | 200 x 63 |

Hyspan | 240 x 63 |

Hyspan | 300 x 63 |

hyspan | 360 x 63 |

Hyspan | 400 x 63 |

Hyspan | 450 x 63 |

Hyspan | 150 x 75 |

Hyspan | 300 x 75 |

Hyspan | 400 x 75 |

Hyspan | 525 x 75 |

## Glue Laminated (LGL)

LGL or Edge Glued Laminate timber is a solid wood alternative to LVL. It has improved stability and nailing properties to LVL. It is treated to H3 as standard. Lengths up to 12 metres.

130 x 45 | 130 x 65 |

150 x 45 | 150 x 65 |

170 x 45 | 170 x 65 |

200 x 45 | 200 x 65 |

245 x 45 | 245 x 65 |

300 x 45 | 300 x 65 |

360 x 45 | 360 x 65 |

## 17C & 17S

The 'C' in 17C stands for 'Camber'. These pre glue laminated pre-cambered beams that are designed to finish straight under a load. 17S are a similar beam but are ('S' - Straight) not pre-cambered. Each of the following can be ordered in either Untreated, H2 or H3 treated.

130 x 65 | 130 x 85 |

165 x 65 | 165 x 85 |

195 x 65 | 195 x 85 |

230 x 65 | 230 x 85 |

260 x 65 | 260 x 85 |

295 x 65 | 295 x 85 |

330 x 65 | 330 x 85 |

360 x 65 | 360 x 85 |

395 x 65 | 395 x 85 |

425 x 65 | 425 x 85 |

460 x 65 | 460 x 85 |

495 x 65 | 495 x 85 |

525 x 65 | 525 x 85 |

560 x 65 | 560 x 85 |

## 18C

A stronger grade than the 17C. 18C is often made from hardwood. It is commonly used as a replacement for 17C and is suitable for lintels or roof beams.

155 x 65 | 155 x 85 | 155 x 115 |

185 x 65 | 185 x 85 | 185 x 115 |

215 x 65 | 215 x 85 | 215 x 115 |

240 x 65 | 240 x 85 | 240 x 115 |

270 x 65 | 270 x 85 | 270 x 115 |

300 x 65 | 300 x 85 | 300 x 115 |

330 x 65 | 330 x 85 | 330 x 115 |

360 x 65 | 360 x 85 | 360 x 115 |

390 x 65 | 390 x 85 | 390 x 115 |

420 x 65 | 420 x 85 | 420 x 115 |

450 x 65 | 450 x 85 | 450 x 115 |

480 x 65 | 480 x 85 | 480 x 115 |

510 x 65 | 510 x 85 | 510 x 115 |

540 x 65 | 540 x 85 | 540 x 115 |

570 x 65 | 570 x 85 | 570 x 115 |

600 x 65 | 600 x 85 | 600 x 115 |

## 21C

Designed for high load and constructed from hardwood species, 21C are durable and termite resistant and are commonly used where aesthetic considerations are critical.

120x65 | 120x85 |

155x65 | 155x85 |

185 x 65 | 185 x 85 |

215 x 65 | 215 x 85 |

280 x 65 | 280 x 85 |

300 x 65 | 300 x 85 |

315 x 65 | 315 x 85 |

350 x 65 | 350 x 85 |

380 x 65 | 380 x 85 |

410 x 65 | 410 x 85 |

445 x 85 | |

475 x 85 | |

505 x 85 | |

535 x 85 | |

570 x 85 | |

600 x 85 |

## Engineered Joists (I-Beams)

Specifically designed for use as joists, these engineered beams consist of two LVL flanges with a structural plywood web. It is a cost-effective, light and strong solution for floor joists. These beams come either H2S or H2 treated in the following sizes;

200 x 45 | 240 x 45 | 240 x 63 | 240 x 90 | 300 x 45 |

300 x 63 | 300 x 90 | 360 x 63 | 360 x 90 | 400 x 90 |

## Web Stiffeners

Web Stiffeners are used to add additional strength to I-Beams in areas where they are under greater load. They come either H2S or H2 treated in the following sizes;

90 x 19 x 2.4m for 45mm I-Beam |

90 x 27 x 2.4m for 63mm I-Beam |

90 x 39 x 2.4m for 90mm I-Beam |

## Rimboard

Rimboard is used to enclose edges on areas using I-Beams. They come either H2S or H2 treated in the following sizes;

200 x 17 x 2.4m |

240 x 17 x 2.4m |

300 x 17 x 2.4m |

360 x 17 x 2.4m |